|
Features TS's
Products |
|
Oscillator:
A current controlled,
state-variable true sine wave oscillator incorporating a fast
AGC circuit. Distortion components are typically 0.1% 2nd and
0.05% 3rd which are low order and not audible making the TS1 &
TS2 useful in making listening tests where a function generator
would generate undesirable, audible side effects. Full frequency
sweeps can be made from 20Hz - 20kHz in a single range. These
units have no amplitude changes over the entire frequency range |
|
Frequency Counter:
The frequency counter is internally
connected to the internal oscillator and displays the oscillator
frequency until a signal is plugged into the input connector. It
then displays the frequency of the input signal. This unique
combination allows absolute precision in setting frequencies. |
|
dB Meter:
The dB meter is a wideband average responding AC voltmeter. The
circuit output is converted to dB for display. Direct reading dB
greatly simplifies alignment procedures. |
|
Battery Pack
Option:
A sealed, maintenance free, Gel-type rechargeable battery
mounted in a metal enclosure on the rear panel of the test set.
(Factory installed only).
Volts: 12Vdc nominal
Capacity @20 Hr rate: 1.2 AH nominal
Discharge current @20 Hr rate: 60mA nominal
Recharging: Battery is automatically recharged
whenever the unit is plugged into AC power and the AC power
switch is on.
Size (W x H x D); Weight: 4" x 2" x 2"; 1.4
lbs. |
|
Impedance Meter: |
The impedance
meter measures complex impedance in ohms. It allows the user to
set up and validate studio equipment, measure components,
develope equipment, test loudspeakers and enclosures and to
measure and validate distributed loudspeaker systems. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|